|
|
|
|
|
|
|
|
|  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
    Distributing boxes   - special models -    
    ELSPRO distributor    

Distributing boxes  -special models-


Please regard the basic models shown on this page as examples which can be modified to meet your demands.
For detailed information download our data sheet.


For your convenience we provide a contact form for your inquiries!
 
Example (large image)



Input:
  20 m cable INDUSTRIEFLEX07 5x16 mm²
with CEE-plug 5x63 A/400 V
on lateral cable take-up
   
Installations:
1 Main switch 63 A/3 pol.
for total circuit breaking
   
Transformers:
1 Isolating transformer
Rated power: 4.500 VA
Rated voltage: 3x400 V/3x400 V
Rated frequency: 50 - 60 Hz
Switches: Dyn 5
primary fused over a
motor-circuit switch 4 - 6 A/ 3pol.
   
Output:
1 CEE built-in socket 5x16 A/400 V
4 Isolating transformers, each
Rated power: 2.500 VA
Rated voltage: 230 V/230 V
Rated frequency: 50 - 60 Hz
primary fused by each over a
thermal overcurrent circuit breaker
   
Output:
4 shock proof sockets
(without earthing contact)
1 Safety isolating transformer
Rated power: 5.500 VA
Rated current: 3x400 V/3x42 V
Rated frequency: 50 - 60 Hz
Switches: Dyn 5
primary fused by over a
motor-circuit switch 6-10 A/3 pol.
- preset to 7,9 A –
   
Output:
6 CEE built-in sockets 3x32 A/42 V
fused over neozed-
fuses 32 A/3 pol.
   
Ventilation:
2 Axial fan,
single fused by neozed-fuses
2 filtered ventilation grids
   
Design:
  - built in a completely all-insulated design
- splashproof
- steel frame revision-dare is protected by a plastic flux coating
- with 2 full rubber support swivel rollers and
  2 full rubber swivel rollers (wheel diameter = 200 mm),
  all with parking brake
- ramming protection above and down
- cover plate with structured mat as tool shelf,
  to be easily taken off after after removing the 4 crane eyes
- the protection devices are located in the switchgear cabinet
  behind a door which is lockable with 2 sash fasteners
   
Special features:
the box consists of impact resistant hostalit, cover plate 15 mm, side parts 10 mm
resistant against acid and caustic solutions
high mechanical solidity
of low flammability as per DIN 4102, B1
sockets with nickel plated contacts,
individually replaceable, VDE-examided and approved

adherance to all technical regulations and all valid electrotechnical safety regulations of VDE